Our Products:
Angle Viewfinder VIDEOS

Still Open!
November 12, 2019, 10:00 am
Flipbac G4 Grip on the Canon Eos
July 04, 2014, 11:20 am
UPDATE - Top 5
July 03, 2013, 12:18 am
It's easy apply and easy to use.


1. First remove any LCD screen protectors.*
Make sure the camera's display is clean.

2. Peel off the sticker backing. Try to have
the Flipbac in an open position.
How to apply

3. Apply the Flipbac directly to the camera's
LCD.* Press down firmly along the frame, as
shown in the video.

       4. The Flipbac is now ready to use. It opens
to more than 180 degrees vertically (portrait)
and horizontally (landscape).

You can start using the Flipbac Angle Viewfinder immediately. However, the bond is at its
strongest after 24 hours. For best results, allow some time for the bond to strengthen.
NOTE: Never pull the stainless steel frame
out of the base.
       NOTE: Do not remove the mirror from the
stainless steel frame.   

  We recommend that you do not apply the Flipbac Angle Viewfinder on top
of a LCD screen protector. We will not warrant adhesion if a screen protector is used with the
Flipbac. Please note that the Flipbac will provide good protection for your camera's display
screen. Many people find they do not need a protector when using the Flipbac.

Policies >>